User manual Be Quiet! Dark Rock Pro 3 (English
Installing of the mounting brackets
Attach the two Intel mounting brackets (4) to the underside of
the CPU cooler using the M3x3 screws (11).
Mounting the CPU cooler
First remove the protective foil from the underside of the
cooler. Spread the thermal paste (15) on the surface of the
CPU. The amount supplied is suffi cient for one or two
applications.
Connect the fan to the CPU fan connector on the
motherboard.
Position the cooler so that it is possible to attach the cooler by
screwing together the M3x16 screws (9)
on the rear side of the motherboard into the hexagonal nuts
with sleeve (6) attached to the cooler.
Connect the fan to the CPU fan connector on the
motherboard.
Position the cooler over the CPU.
Place the hexagonal nuts (8) over the spacer nuts (7) and
progressively tighten these in a crosswise manner until fi rm
using the hexagonal wrench (14).
Introduction: Thank you for deciding to purchase a be quiet!
product. The following instructions will guide you through the
installation process. If you do encounter installation problems,
please don’t hesitate to contact our customer services by
mailing [email protected]. Please note that be quiet!
cannot accept liability for damage caused by compatibility
problems.
Warranty:
• 3 years manufacturer guarantee for consumers (original
purchase from authorized be quiet! dealers only)
• Guarantee work can only be processed with an included
copy of the purchase receipt from an authorized be quiet!
dealer
• Manipulation and structural changes of any kind as well
as damages through external mechanical forces lead to a
complete voiding of the guarantee
• Our General Warranty Conditions apply, which can be
viewed on bequiet.com
Listan GmbH & Co.
KG . Biedenkamp 3a . 21509 Glinde
Germany
For further information contact us via e-mail:
[email protected]
SCOPE OF DELIVERY
General
We recommend mounting the cooler outside the PC case.
The following parts are needed for this:
1x be quiet! Dark Rock Pro 3 CPU cooler (1), 2x Intel mounting
brackets (4), 4x spacer nuts (7), 4x hexagonal nuts (8), 4x M3x3
screws (11), 1x hexagonal wrench (14), 1x thermal paste (15)
First screw the spacer nuts (7) onto the threads of the socket
frame. Use the hexagonal wrench (14) for this.
Installation of the mounting brackets
Attach the two Intel mounting brackets (4) to the underside of
the CPU cooler using the M3x3 screws (11).
Mounting the CPU cooler
First remove the protective foil from the underside of the
cooler. Spread the thermal paste (15) on the surface of the
CPU. The amount supplied is suffi cient for one or two
applications.
General
With preassembled motherboards we recommend installing
the cooler inside the PC case over the motherboard cutout.
The following parts are needed for this:
1x be quiet! Dark Rock Pro 3 CPU cooler (1), 1x Intel backplate
(2), 2x Intel mounting brackets (4), 4x hexagonal nuts with sleeve
(6), 4x hexagonal nuts (8), 4x M3x16 screws (9), 4x M3x3 screws
(11), 4x C-profi le spacers (12), 1x hexagonal wrench (14), 1x
thermal paste (15)
Affi xing the backplate
Position the Intel backplate (2) on the rear side of the
motherboard. Then insert the M3x16 screws (9) through the
drill holes situated on the rear side of the backplate.
Fasten the backplate on the front side of the motherboard
using the C-profi le spacers (12) by pressing these onto the
notches in the M3x16 screws (9) until they click in.
Assembly of the mounting brackets
Insert the hexagonal nut with sleeve (6) from below through
each Intel mounting bracket (4) and screw together from
above with the hexagonal nuts (8).
Use the hexagonal wrench
(14) for this.
1366
1150, 1151,
1155, 1156
775
(Bottom view)
775
1150, 1151,
1155, 1156
1366
Intel LGA 2011(-3) square ILM / LGA 2066
Intel LGA 775 / 1366 / 1150 / 1151 / 1155 / 1156
We recommend removal of the cooler prior to transportation.
August 2017
!
Part name Quantity
be quiet! Dark Rock Pro 3 cooler 1
Intel backplate 1
AMD backplate 1
Intel mounting brackets 2
Short AMD mounting brackets 2
Hexagonal nuts with sleeve 4
Spacer nuts 4
Part name Quantity
Hexagonal nuts 4
M3x16 screws 4
AMD M3x15 screws 4
M3x3 screws 4
C-profi le spacers 4
AMD washers 4
Hexagonal wrench 1
Thermal paste 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
DARK ROCK PRO 4 silent high-end Air coolers from be quiet!
high-end
Article number: BK022
Further models
-
Dark Rock Pro 4
-
Dark Rock Pro TR4
-
Dark Rock 4
-
Dark Rock TF 2
-
Dark Rock Slim
No Compromise Silence and Performance
Dark Rock Pro 4 offers an immense cooling performance of 250W TDP and virtually inaudible operation. Excellent for overclocked systems and demanding workstations.
- 2 virtually inaudible Silent Wings PWM fans
- Funnel-shaped frame of the front fan for high air pressure
- Achieves only 24.3dB(A) at maximum fan speed
- 7 high-performance copper heat pipes
- Airflow-optimized cooling fins; cutouts enhance the RAM compatibility
- Easily installable black installation kit can be mounted from above
- Brushed aluminum top cover with diamond cut finish
- 3-year manufacturer’s warranty
- German product conception, design and quality control
Characteristics
-
Highlights
-
Technical data
-
Press coverage
-
Downloads
-
Installation videos
VIRTUALLY INAUDIBLE OPERATION
Even at 100% PWM fan speed noise is an insignificant 24. 3dB(A)
The 2 Silent Wings PWM fans feature advanced fluid-dynamic bearings, smooth 6-pole motors and airflow-optimized fan blades. The front Silent Wings 3 fan provides extremely high air pressure, thanks to a funnel-shaped air inlet in the frame. Decoupled fan mounting with vibration-isolating elements on the heat sink.
IMMENSE COOLING POWER
Achieving an incredible performance-to-noise ratio
No compromise in silence and performance for overclocked systems and demanding graphics applications! Dark Rock Pro 4 provides an impressive rating of 250W TDP and achieves low temperatures even during periods of peak CPU performance.
HIGHLY ADVANCED DESIGN
The core features that result in high-end cooling
Dark Rock Pro 4 is equipped with 7 advanced technology 6mm copper heat pipes that maximize the heat conductance. Airflow-optimized, wave-contoured cooling fins with small dots on their surfaces increase the air circulation. The special black coating with ceramic particles makes a perfect transfer of heat possible.
DOUBLE-TOWER LAYOUT
Powerful cooling for your components
Dark Rock Pro 4 contains 2 aluminum heat sinks. The cutouts provided enhance its RAM compatibility. 2 fans are pre-installed. It is also possible to add another 120mm fan for even better cooling.
USER-FRIENDLY ELEGANCE
Stylish and easy to install
The mounting kit for the Dark Rock Pro 4 cooler is completely black, perfectly matching the black design of the cooler itself. You can conveniently install the cooler on the motherboard from above. The brushed aluminum top cover with its diamond cut finish adds a touch of elegance to this high-end cooler.
—>
{{#awards}}
{{/awards}}
{{ Title }} {{ MediumName }}
high res
{{/Highres}}
{{/awards}}
General data
Model | Dark Rock Pro 4 |
TDP (W) | 250 |
Color option | Black |
Overall dimensions without mounting material (L x W x H), (mm) | 121 x 136 x 163 |
Total weight (kg) | 1. 13 |
Socket compatibility Intel | 1700 / 1200 / 2066 / 1150 / 1151 / 1155 / 2011(-3) Square ILM |
Socket compatibility AMD | AM5 / AM4 |
Overall noise level (dB(A)) @ 50/75/100% (rpm) | 12.8 / 17.9 / 24.3 |
Number of fans | 2 |
Decoupled fan mounting | ✓ |
Infographics
open all / close all
Dimensions (L x W x H), (mm) | 146 x 136 x 163 |
Fin material | Aluminum |
Surface treatment | Ceramic coating |
Base material | Copper |
CPU contact surface | CNC machined |
Heatpipe number / Diameter (mm) | 7 / 6 |
Fan model | PWM / PWM |
Fan dimensions (mm) | 135 x 135 x 22 / 120 x 120 x 25 |
Speed @ 100% 6-pole fan motor | |
Rated Voltage (V) | 12 |
Input current (A) | 0. 08 / 0.08 |
Input power (W) | 0.96 / 0.96 |
Connector | 4-pin PWM |
Lighting connector | — |
Cable length (mm) | 220 / 220 |
Lifespan (h / 25°C) | 300,000 |
Thermal grease (Type) | Included |
Mounting set | Intel & AMD |
Y-Cable | ✓ |
User manual languages | DE, EN, ES, FR, PL, RU |
Approvals | — |
7. Prices in stores 7.1. Ukraine 7.2. Russia Positioning on the marketBut first, about the market position of this model. At the time of testing, the cooler did not have an official price, and at the time of writing this material, it has not appeared. However, in some places it was said about the amount of 60 euros, and for be quiet! it’s very civil. Scope of deliveryDark Rock Slim is delivered inside a classic box, packed in foam rubber. Together with the heatsink itself, there is a 120mm Silent Wings 3 fan, a two-dose tube of be quiet DC-1 thermal paste, as well as instructions and a set of mounts for mainstream platforms. Compatibility“Slim Dark Rock” installs on Intel LGA 1150 / 1151 / 1155 / 1156 / 1366 / 2011(-3) Square ILM / 2066 and AMD sockets including AM2(+) / AM3(+ ) / AM4 / FM1 / FM2(+). See also: be quiet! Dark Rock Pro 4 As for the height, I will say this — it fits into the DeepCool Kendomen RD case, but only due to the fact that its side wall is curved. I’ll tell you about the installation a little later, now is the time for beauty. AppearanceVisually Dark Rock Slim is good. Continuing the tradition of the series’ dark tones, even its heatpipes are blackened for the sake of appearance. The only elements in a color other than #000000 are the embossed be quiet! on the plate on top and polished bottom of the pad. Four heat pipes, no direct contact with the processor heat spreader. They permeate the radiator with different fin profiles for better cooling. Top view of be quiet! Dark Rock Slim is asymmetrical, one side protrudes noticeably compared to the other. The protruding side has cutouts in the radiator plates, where, excuse me, anti-vibration rubber spacers are pushed. The fan is also installed on this side, just in the place vacated by the cutouts. On the other hand, you can also install a fan, and no longer 120 mm, but more. Fortunately, there are two pairs of brackets for installation. The cooler weighs 620 grams, has overall dimensions of 72 x 127 x 159.4 mm and an impressive heat sink — 180 W. The fan, as mentioned above, is a 120mm Silent Wings 3 fan with a maximum rotation speed of 1450 RPM and a maximum noise level of 16.4 dB(A). The speed is low, but the air flow is enough to cover the entire radiator. And it shows up in tests. By the way, about the birds. Test stand
Processor AMD Ryzen 7 1800X provided by Kiev-IT store. The 16-thread monster calmly wipes its nose at competitors in work tasks, but it also performs well in games due to the turbo frequency up to 4 GHz. Plus — unlocked multiplier and TDP of only 95W. Tests were run for 10 minutes in the AIDA64 stress test. The first test is on auto-frequency control, initially set to 3.6 GHz. Result: 75 degrees Celsius with fan speed up to 1350 RPM. After setting a fixed frequency of 3.7 GHz for all cores in 10 minutes, the temperature settled at around 84 degrees Celsius. Fan speed approached the peak 1500 RPM. But the nice thing is that the turntable was still not audible, even with such a load. So my fears were unfounded. be quiet! Dark Rock SlimAll is well. The only reason why I could not recommend the cooler is the overpriced price, but it is unlikely to be so. Other than that, it’s a very nice CPU cooler. Beautiful, efficient, supporting more than just 120mm turntables. You can find fault with the way the fan is installed, and a little with the height of the radiator, but such a gaming cooler is not installed in super-narrow cases. So, in the absence of evidence to the contrary, we recommend! Prices in storesUkraine
Russia
Hallway «Model 99» price, photo and descriptionHallway «Model 99» price, photo and description — GILD Furniture in Irkutsk
Upload photo Select a file Specify any information (product dimensions, materials, comments) * the more information, the more accurate the calculation
Upload photo Enter phone number Select communication method SMS call
By clicking on the «Order calculation» button, If yes, download it, if not, click «Next». Upload your version of Select a file Next Step 1 of 10 Step 2 of 10 Enter three distances in millimeters * L 2 mm L 3 mm Next Step 2 of 10 Enter the total length of the kitchen Next Step 2 of 10 Enter two distances in millimeters * L 2 mm Further Step 3 of 10 Step 4 of 10 Step 4 of 10 Step 5 of 10 Step 6 of 10 Step 7 of 10 Step 8 of 10 Next Step 9 of 10 Step 10 of 10 Next
Other
Other And we will call you back to clarify and agree on the details of the order Enter your name Enter your phone number By clicking on the «Request a call» button, To order a free measurement, call Enter your name Enter your phone number By clicking on the «Request a call» button, We will contact you in the near future We will contact you in the near future We will contact you We will contact you in the near future By you soon If yes, download it, if not, click «Next». Upload your version of Select a file Next Step 1 of 6 Step 2 of 6 Step 3 of 6 Enter cabinet length Enter cabinet height Next Step 3 of 6 Enter cabinet length Enter cabinet height Next Step 3 of 6 Enter cabinet length Enter cabinet height Next Step 3 of 6 Enter cabinet length L1 Enter cabinet length L2 Enter cabinet height Next Step 3 of 6 Enter cabinet length L1 Enter cabinet length L2 Enter cabinet height Next Step 3 of 6 Enter cabinet length L1 Enter cabinet length L2 Enter cabinet height Next Step 3 of 6 Enter cabinet length L1 Enter cabinet length L2 Enter cabinet height Next Step 3 of 6 Enter cabinet length L1 |