Apex max fps: How to Set or Remove the FPS Cap in Apex Legends

How to get higher FPS on Apex Legends and avoid 144 FPS cap on PC

Getting higher FPS always makes a difference in terms of competitive gaming. Especially for fast-paced games like Apex Legends, high FPS will give you an edge over your opponents. This guide is for you if you face low FPS despite having decent enough hardware.

 

Today, we will tell you all the methods that will allow you to increase your overall FPS in Apex Legends. These techniques can be applied to the Steam and Origin versions of the game. Moreover, we will also tell some techniques for people with slightly weaker hardware.

 

We will walk you through multiple methods in this guide on how to get high FPS in Apex Legends. So let’s jump into it.

 

 

Removing 144 FPS Cap on PC

The issue many Apex Legends players face is the built-in frame cap. This frame cap doesn’t allow your FPS to go above 144 and, as a result, drops the FPS below 144 at times. To remove this cap, follow all the steps given below:

 

  1. Open Origin or Steam.

  2. Go to your Game Library and right-click on Apex Legends

  3. Click the ‘Game Properties’ option on Origin.

  4. If on Steam, choose ‘Properties.’

  5. Navigate to the Advanced Launch Options (Origin)/General (Steam) tab on your preferred platform.

  6. Under Command line arguments (Origin) or Launch Options (Steam), type: +fps_max unlimited.

  7. Now you will see an unlocked frame rate in your Apex Legends game.

 

If you have a high-budget gaming PC, this technique is enough to boost your game in terms of FPS. 

 

However, some gamers may be facing FPS drops because they’re not using the correct combination of visual settings in Apex Legends. I wouldn’t blame you because Apex Legends features many different options. Аnd we can achieve maximum performance by tinkering with these settings.

 

The Ultimate Valorant

Aim Training Course

Learn More

 

 

Optimal Settings For FPS Boost

The simplest solution for the optimal settings would be to turn settings to the minimum. However, that should only be used as a last resort because doing that will cause your game to become a little less visually pleasing. But if you have insane FPS drops, doing that is the best option. 

 

So here are a few settings options you can use:

 

Ensure your V-Sync is set to “Adaptive (1/2 Rate).” Then make sure you’ve disabled your FOV Ability Scaling.

 

 

In the advanced settings, use the Very Low preset for Texture Streaming Budget if you have 2GB or less VRAM and set the Texture Filtering to 2X. Disabling Ambient Occlusion may also prove beneficial for your performance. 

 

Follow all the other settings as per the screenshot.

 

 

Keep the Model Detail at Medium. If you drop it down further, things may appear a bit blurry. However, you can decrease the Effects Detail further if the Medium setting hinders your performance. 

 

 

So these settings should boost your FPS enough while keeping most of the visual quality intact. But if these tweaks do not boost your FPS, it is time to upgrade your PC. 

 

 

 

System Requirements for Apex Legends

Unfortunately, for some users, their gaming setup is the crucial factor affecting their FPS performance in Apex Legends. Unlike a gaming console, your PC must have the required components to run games. 

 

So let’s look at the official system requirements for Apex Legends. It will help you figure out which parts you need to upgrade.

 

Minimum Requirements:

Minimum Requirements provide you with specs to help you decently run the game at medium/low settings. These requirements are as follows:

 

  • OS: 64-bit Windows 10

  • CPU: Intel Core i3-6300 3.8GHz / AMD FX-4350 4.2 GHz Quad-Core Processor

  • RAM: 6GB

  • GPU: NVIDIA GeForce GT 640 / Radeon HD 7730

  • GPU RAM: 1 GB

  • HARD DRIVE: 90 GB of free space

 

These requirements are slightly outdated. Personally, I’d recommend using at least a 2GB GPU
And 8 GB or RAM just for extra measure. So, if you have similar or better specs, you should stick with them and continue playing Apex. However, if you want a further performance boost, let’s consider the recommended requirements.

 

Recommended Requirements

In addition to the minimum requirements, Respawn has also given the Recommended Requirements for Apex Legends. These are:

 

  • OS: 64-bit Windows 10

  • CPU: Intel i5 3570K or equivalent

  • RAM: 8GB

  • GPU: Nvidia GeForce GTX 970 / AMD Radeon R9 290

  • GPU RAM: 8GB

  • HARD DRIVE: 90 GB of free space

 

Most of these specs are still good. However, I’d suggest upgrading the RAM to 16 GB if you’re planning to get the maximum FPS with this configuration. These specs will easily allow you to achieve 60+ FPS even with the higher graphic preset. 

 

Conclusion

So this was our guide on how to get high FPS on Apex Legends. We have also included the steps to remove the 144 FPS cap in Apex Legends. We hope this guide helps you improve your gameplay.

Reddit — Dive into anything

I have tried to collect every performance boost, fps increase information in this thread, I hope this helps others as much as it has helped me. You can go for lower setting than this, but it will come at a high price…

Video Settings

  • Display Mode: Full Screen

  • Aspect Ratio: 16:9 (native)

  • Resolution: 1920×1080 (native)

  • Brightness: 50%

  • Field of View: 110*

  • FOV Ability Scaling: Disabled

  • Sprint View Shake: Minimal

*If you feel comfortable lower your FOV for some fps increase.

Advanced Settings

  • V-Sync: Disabled

  • Nvidia Reflex: Enabled + Boost

  • Adaptive Resolution FPS Target: 0

  • Adaptive Supersampling: Disabled

  • Anti-aliasing: TSAA*

  • Texture Streaming Budget: Insane 8GB VRAM (equal to your GPU VRAM)

  • Texture Filtering: Anisotropic 16x*

  • Ambient Occlusion Quality: Disabled

  • Sun Shadow Coverage: Low

  • Sun Shadow Detail: Low

  • Spot Shadow Detail: Disabled

  • Volumetric Lightning: Disabled

  • Dynamic Spot Shadows: Disabled*

  • Model Detail: Medium*

  • Effects Detail: Low

  • Impact Marks: Low*

  • Ragdolls: Low

*These setting marked could be set lower, but will have a significant impact on your gaming experience.

Nvidia control Panel

Open Nvidia Control Panel > Manage 3D Settings > Program Settings > Add: C:\Program Files (x86)\Steam\steamapps\common\Apex Legends and select r5apex.exe

  • Anisotropic filtering: Application-controlled

  • Antialiasing — FXAA: Off

  • Antialiasing — Gamma correction: On

  • Antialiasing — Mode: Off

  • Antialiasing — Transparency: Off

  • Background Application Max Frame Rate: Off

  • CUDA — GPUs: All

  • Low Latency Mode: Ultra

  • Max Frame Rate: Off

  • Monitor Technology: G-Sync

  • Multi-Frame Sampled AA (MFAA): Off

  • OpenGL rendering GPU: NVIDIA GeForce

  • Power management mode: Prefer maximum Performance

  • Preferred Refresh rate: Highest available

  • Shader Cache: On

  • Texture filtering — Anisotropic sample optimization: On

  • Texture filtering — Negative LOD bias: Allow

  • Texture filtering — Quality: High Performance

  • Texture filtering — Trilinear optimization: On

  • Threaded optimization: On

  • Triple buffering: Off

  • Vertical Sync: Off

  • Virtual Reality pre-rendered frames: 1

Nvidia GeForce Experience

AMD Radeon Settings

Open AMD Radeon Settings > Gaming > Select ROE

  • Anti-aliasing Mode: Use application settings

  • Anti-aliasing Method: Multisampling

  • Morphological Filtering: Off

  • Anisotropic Filtering Mode: Use Application settings

  • Texture Filtering Quality: Performance

  • Surface Format Optimization: On

  • Wait for Vertical Refresh: Always off

  • OpenGL Triple Buffering: Off

  • Shader Cache: On

  • Tessellation Mode: Override application settings

  • Maximum Tessellation Level: Off

  • AMD FreeSync: AMD optimized

  • Frame Rate Target Control: Disabled

Steam

Right click Apex Legends in the Steam Library > Properties > General tab

Setting > Web Browser

Origin

Left click Apex Legends in the My Game library > Settings > Game Properties > Advanced Launch Options

Videoconfig. txt file

Win+R and navigate to %USERPROFILE%\Saved Games\Respawn\Apex\local and edit videoconfig.txt

Make the file videoconfig.txt read-only!

Game DVR

Windows Hibernation

Windows DPI scaling

C:\Program Files (x86)\Steam\steamapps\common\Apex Legends and right click r5apex.exe

Windows GUI

This is a drastic move and it will have impact on your GUI experience in Windows, use it as a last resort.

Power Management

Laptop users be warned this will consume much more battery! On Windows 7 set this to Performance Mode.

  • Settings > System > Power & sleep > Additional Power Settings

  • Under Choose to customize a power plan, expand the option which says “Unhide Additional plans.”

  • Select Ultimate Performance, if you do not see it, then follow the next steps.

  • Open a cmd.exe as Administrator

  • In the command prompt, copy the following command, and hit Enter.

  • powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61

CPU Parking

Registry

Use it at your own risk! Recommended to backup registry beforehand and create a restore point too.

  • Run regedit.exe

  • Find «HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile» create/edit

  • Find «HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile\Tasks\Games» edit

ADDITIONAL

  1. Close unused background programs.

  2. Clean system using cleanmgr.exe or CCleaner.

  3. Update all device drivers (e.g. with Driver Booster 6), especially Nvidia/AMD drivers! To uninstall previous display drivers I recommend using DDU.

  4. Disable Hardware optimization where it’s possible (Chrome, Discord, Steam …etc).

  5. Don’t play on Wi-Fi, play over cable.

  6. Run game on SSD.

  7. Re-Install game once in a while.

If still not satisfied with the result look into CPU/GPU/RAM overclocking possibilities.

I get up-to 240+ FPS, but stable 144FPS if locked via RivaTuner.

My Setup: Asus Strix Z270H / Intel® Core™ i7-7700K / ASUS GeForce GTX 1080 Ti 11GB / Samsung 960 Evo 250GB M.2 / Samsung 970 Evo Plus 1TB M.2 / Corsair Vengeance LPX 2x8GB 3000Mhz / Fractal Design Integra M 750W Bronze / Fractal Design Celsius S36 3x120mm / Phanteks Enthoo Luxe / Windows 10 x64

How to remove or set an FPS cap in Apex Legends

If you need to set an FPS cap or, on the contrary, remove it, then we will tell you about all the ways that can help you. In a recent article, we described that the game can crash without an error due to the enabled restriction … In general, here you will find all the answers.

How to remove the FPS limit

Before we start describing the process, let’s say that the game itself does not automatically adjust to your FPS. If you play on Steam, and you have a monitor with 144 or 200+ hertz, then these hertz will not show themselves right away. We’ll have to remove the restriction. nine0003

Apex Legends

Change V-Sync

We go into the game and first of all open the video settings. There we are looking for vertical synchronization and completely disable it. So we will remove the initial frame limit, which may be.

Important! Yes, many players will say that after changing this setting, they still have 60 frames per second both in the game and in the lobby. We know. But further — more. Will have to open launch options

Disable vertical sync

Steam launch options

How to open them and why enter them? Open: «Steam — Library of games — Apex Legends (click on the game RMB) — Properties». In the first window, we have a line at the bottom with the signature: launch options.

Launch parameters

To remove the limitation (which may or may not be present), enter the command: +fps_max 0 or +fps_max 144. Done! The restriction has been lifted. nine0003

Launch options Origin

Do the same. We go into the launcher, then right-click on the game and open the launch options. There we prescribe the same commands that are in the header above. Profit!

Forgot to remove the restriction

The most common mistake of users who have just bought a monitor with increased hertz … They did not set the correct settings in the system itself. So, your monitor is connected to the computer, here you are rejoicing at the new dimensions. It’s time to click on the desktop on the «RMB» and open: Display settings. nine0003

How to put a lot of fps on the monitor

Scroll down in the screen settings and find: «Advanced display settings». Now scroll down again and find the toggle switch, as in the screenshot. We set the monitor indicator (144 or 240). Ready!

How to limit FPS in Apex Legends

If, on the contrary, you want to limit FPS, because “the hardware can’t cope and gets very hot”, then you will have to use the launch options again, but with different values ​​in the command. nine0003

Launch options

Open them again in Origin or Steam, and then write the command:

+ fps_max (limit number)

After activating the command (be sure to write exactly as above, otherwise the syntax will not work ), you will have a character limit in Apex Legends. It remains only to set the correct settings and the iron will not get so hot. You can also try to enter -freq 144, then you, if the hertz at 144 frames, will be only 144 and above the computer simply will not “drive” FPS. However, FPS max does a great job. nine0003

How to increase FPS in Apex Legends?

Published: Heading: Guides

The best ways to increase FPS in Apex Legends. In the article you will find the correct settings for the game, Windows and video card. Therefore, you can optimize not only the game, but the entire system as a whole.

  • Settings for AMD Radeon graphics cards for Apex Legends
  • Additional measures

    • Game settings

    • Display mode: Select Full screen . This will allow the game to use all available resources.
    • Aspect ratio: You need to leave the value suitable for your monitor. For most, it’s 16:9.
    • Resolution: It is best to use the resolution of your monitor. If you want a few extra FPS, then you can lower it. Some professional players prefer to play with black bars, but believe me, this has nothing to do with optimization. nine0080
    • Field of View : This setting often has no effect on performance.
    • Vert. sync: Off It is very important to disable this setting. If you have vertical sync enabled, this means that the game does not display the image until the image is vertically synced. Because of this, delays may occur during the game.
    • Adaptive resolution: We recommend setting it to 40%.
    • Smoothing: Disabling this effect will improve the performance of Apex Legends by 2-3%.
    • Texture quality : This parameter controls texture resolution and quality. For maximum performance, select «No» . This will give you an additional 5-6% optimization.
    • Texture Filtering : Best to use bilinear filtering. Switching from the maximum value to bilinear filtering will give you 5-6% performance. nine0080
    • Ambient Shading Quality : Be sure to set Off. This will speed up the performance of Apex Legends by 15%.
    • Sun Shadow Coverage : Set Low to . You will be able to get 4% for game optimization.
    • Shadow detail (sun) : Select Low . Performance will improve by 2%.
    • Shadow detail : Disable this feature and you can get 3% performance improvement. nine0080
    • Volumetric Lighting : Disable this option. This will improve performance by 5%.
    • Dynamic Shadows (Points) : This setting has a small effect on performance. But our choice is «Off» .
    • Quality of models : Set «Low» . This will help improve performance by 5%.
    • Effect Quality : Set to «Low» . But remember that this does not particularly affect the optimization. nine0080
    • Impact marks : Can be set to Off . Although this parameter does not particularly affect performance.
    • Physics bodies : Need to put «Low» . The parameter controls the physics of dead bodies.

    Windows settings

    Delete your computer’s temporary files

    Attention! Pre-save passwords and important bookmarks from the browser. Along with the cache, personal information is also deleted. Skip this step if you do not want to enter data again. But we advise you to take the time to do this, because it will significantly improve the operation of Windows and programs. nine0003

    1. Type %localappdata% into Windows search.
    2. Open the found folder.
    3. Delete the files that will be inside the open folder.
    Select High Performance Power Mode

    Go to the Windows Control Panel and open the Hardware and Sound menu. After that, go to «Power Options» and select «High performance». If this mode is not listed, then type «cmd» into the Windows search and open a command prompt. Copy there — «powercfg -duplicatescheme e9a42b02-d5df-448d-aa00-03f14749eb61» and press Enter. This will help unlock the desired mode.

    Select high graphics performance mode

    Search «Graphics settings» in Windows search. Open the found menu and click «Browse». Add the r5apex.exe file from the folder with the game installed. Click Options and select High Performance.

    Turn off Game DVR

    Open the start menu, then click on the gear icon. Then go to the «Games» section of the game. Here you need to disable the «Record Game Clips» feature. Next, go to the «Game DVR» section and turn off the «Record in the background» and «Record sound during game» functions. nine0003

    Update your graphics card driver and DirectX version

    It is important that you have the latest graphics card driver and DirectX updated. This will help improve the performance of your computer. It will also help you avoid many problems.

    Settings for Nvidia graphics cards for Apex Legends

    Open the Windows Control Panel, then go to the Hardware and Sound section. Now select «Nvidia Control Panel». Locate the «Manage 3D Settings» menu and click «Program Settings». Select «Add» and find the r5apex.exe file in the Apex Legends folder. nine0003

    Use the following settings:

    • Anisotropic filtering: Off
    • FXAA: Off
    • Smoothing gamma correction: Off
    • Smoothing mode: Off
    • Smoothing parameters: No
    • Anti-Aliasing-Transparency: Off
    • Maximum number of preset frames: 1
    • Power management mode: Maximum performance mode preferred
    • Shader Caching: On
    • Texture Filtering : Anisotropic Sampled Optimization: Off
    • Texture Filtering : Negative Deviation LL: Allow
    • Texture filtering : Quality: High performance
    • Texture Filtering: Trilinear Optimization: Off

      • nine0079 Stream optimization : On

    • Triple buffering : Off
    • V-sync: Off
    GeForce Experience (for Nvidia)

    Open settings in GeForce Experience. Find the «General» section and disable the «In-Game Overlay» feature. Now go to the «Shield» section and disable «Gamestream».

    Settings for AMD Radeon graphics cards for Apex Legends

    Use the following settings:

    • Smoothing mode: Application control
    • Smoothing method: Multisampling
    • Morphological filtering: Off
    • Anisotropic filtering mode: Application control
    • Texture filtering quality: Performance
    • Surface format optimization: On
    • Waiting for vertical update: Always off
    • OpenGL Triple Buffering: Off
    • Shader Cache: On
    • Tessellation mode: Override application settings
    • Maximum tessellation level: Off
    • AMD FreeSync: AMD optimized
    • Target frame rate control: Disabled

    Additional measures

    • Disable unnecessary programs from system startup.
    On By alexxlab