Z390 on the Cheap: Overclocking Comparison
Why you can trust Tom’s Hardware
Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
Overclocking Comparison
Frequency and voltage ranges for each of the three competing boards remain the same for the Core i5-9600K as they were on the Core i9-9900K of previous reviews, but the smaller CPU with fewer cores overclocks differently, and part of that difference is that the lack of Intel Hyperthreading Technology reduces stress on the cores. We wanted to see if we could get higher overclocks due to that reduced stress while running the same core voltage (1.30V), though the reduced heat output means that we could have stepped things up a bit instead: We recommend no more than 1.35V at full load to increase the likelihood of CPU longevity.
Frequency and Voltage Settings
Swipe to scroll horizontally
| ASRock Z390 Extreme4 | Gigabyte Z390 Gaming SLI | MSI MAG Z390 Tomahawk | |
| BIOS | P2. |
F7 (03/14/2019) | 1.40 (02/21/2019) |
| Base Clock | 100-500 MHz (100 kHz) | 80-500 MHz (10 kHz) | 98-538 MHz (10 kHz) |
| CPU Multiplier | 8x-120x (1x) | 8x-127x (1x) | 8x-120x (1x) |
| DRAM Data Rates | 800-8400 (100/133.3 MHz) | 800-8166 (100/133.3 MHz) | 800-6000 (100/133.3 MHz) |
| CPU Vcore | 0.90-1.52V (5 mV) | 1.10-1.80V (5 mV) | 0.60-1.52V (5mV) |
| System Agent | 0.95-1.35V (10 mV) | 0.80-1.50 V (10 mV) | 0.60-2.00V (10mV) |
| CPU I/O | 0. 85-1.35V (5 mV) |
0.80-1.50 V (10 mV) | 0.60-2.00V (10mV) |
| PCH Voltage | 0.90-1.30V (10 mV) | 0.80-1.30 V (20 mV) | 0.60-2.00V (10mV) |
| DRAM Voltage | 1.10-1.80V (5 mV) | 1.00-2.00 V (10 mV) | 0.60-2.20V (10mV) |
| CAS Latency | 4-31 Cycles | 5-31 Cycles | 4-31 Cycles |
| tRCD | 8-63 Cycles | 1-63 Cycles | 4-63 Cycles |
| tRP | 8-63 Cycles | 1-63 Cycles | 4-63 Cycles |
| tRAS | 28-63 Cycles | 1-127 Cycles | 28-63 Cycles |
When overclocking, more voltage means a stronger signal that can support higher frequencies, but it also generates more heat that can lead to less stability, long-term damage, or thermal throttling.
For the competitive overclocker, this leads to a constant effort to find a better way to keep things cool. In addition to our below performance test kit, we placed a RDM1225S fan from Swiftech over the voltage regulator of each configuration during our overclocking evaluation.
- ASRock Z390 Extreme4 (64GB Black) at Amazon for $780
Swipe to scroll horizontally
| Case | Haf XB EVO |
| Cooler | Fractal Design Celsius S24 |
| CPU | I5-9600K |
| RAM | Predator DDR4 RGB |
Another phenomenon is that CPU core voltage drops when encountering an extremely difficult software load. Heat again is a factor, as hotter transistors leak more current, which in turn causes more heat and reduces voltage for the entire circuit.
Overclockers call this “vdroop”, and overclockable motherboards usually have a setting called Load Line Calibration (or some variation thereof) to boost core voltage back to the desired level. (Note that many sites refer to Vdroop as a design feature that’s added to reduce overshoot upon the release of that load, but we’re treating it as being intentionally uncompensated at default CPU settings for the same reason.)
Overclocking The 9600K on ASRock’s Z390 Extreme4
We were initially surprised to see the Z390 Extreme4 selling continuously for 22% below MSRP, but then even more surprised when it couldn’t run our Core i9-9900K at its full 4.70 GHz Intel Turbo Boost frequency for more than a few seconds. Initially priced appropriately to its feature set, ASRock’s price reductions positioned it perfectly within the Core i5-9600K’s target market.
Image 1 of 2
The 9600K’s reduced core count allowed the Z390 Extreme4 to push it beyond 5.0 GHz to 5.05 GHz without overstressing the board’s voltage regulator, as it held a 1.
30V CPU core under full load via its “Level 1” Load-Line Calibration setting. On the same voltage menu, its 1.335V memory setting produced a meter-verified 1.353V, so we stopped there.
Image 1 of 2
The Z390 Extreme4 still pushed our HyperX Predator RGB DDR4-2933 four-DIMM kit to a respectable DDR4-3733 at CAS 19-21-21-42.
Overclocking The 9600K on Gigabyte’s Z390 Gaming SLI
Gigabyte’s entry was the only sub-$160 motherboard we’d tested to fully support our Core i9-9900K at its standard 4.7 GHz all-core Turbo Boost ratio, and this sample even went on to push that same CPU to 4.90 GHz at 1.30V. But being the best-in-class to cope with our high-draw CPU didn’t mean it would necessarily have the finesse to beat weaker boards when paired with the thriftier 9600K.
Image 1 of 3
The Z390 Gaming SLI’s 5.05 GHz final clock for our Core i5-9600K is merely a match for the competing ASRock results. Gigabyte’s “Turbo” mode CPU Vcore Loadline Calibration also has less voltage over-boost when paired with the lower-power 9600K, allowing use to use its 1.
285V CPU core to reach 1.300V under load, compared to our previous 1.270V on the 9900K.
Image 1 of 4
With only 10mV steps in for its DIMM voltage and a 5-6mV gain, we had to pick 1.340V to keep the board from reaching our 1.355V test ceiling. It still pushed our set of four DDR4-2933 DIMMs past DDR4-3733 once we relaxed its primary timings to 19-21-21-42.
Overclocking The 9600K on MSI’s MAG Z390 Tomahawk
In our original MAG Z390 Tomahawk review, we had to reduce our Core i9-9900K’s core voltage to 1.20V simply to keep the motherboard’s voltage regulator cool enough to run that processor’s stock 4.70 GHz Intel Turbo Boost frequency. Stepping down to the 9600K lightens the load significantly, allowing it to easily support an overclock to 5.0 GHz. Getting our CPU to the desired 1.30V under full load was possible in two ways, either by setting 1.30V core on the main OC menu and Mode 5 CPU Loadline Calibration with its DigitALL Power submenu, or by setting 1.285V core and Moder 4 Loadline Calibration.
The later setting held closer to 1.30V when the board got hot.
Image 1 of 3
The MAG Z390 Tomahawk has only 10mV steps for its DRAM adjustment, and the 1.330V setting produced a measured 1.346V at the DIMM slots. That’s what we had to use, since the next higher setting broke past our 1.355V test ceiling. Despite this, the board pushed our DDR4-2933 samples past DDR4-3733 with all four DIMMs installed.
Image 1 of 2
One thing we found important not to do was to disable “CPU VRM Over Temperature Protection”. We would need higher than stock CPU current to complete our round of Prime95 testing though, so we used the board’s maximum-allowed CPU Over Current Protection from the DigitALL submenu, along with the highest Long Duration Power, Short Duration Power, and CPU Current limits from the CPU Features submenu.
Results
While the Z390 Extreme4 and Z390 Gaming SLI tied for first place in Core i5-9600K overclocking, the ASRock sample reached a higher two-DIMM memory overclock and the Gigabyte sample pushed the complete four-DIMM kit farther.
Meanwhile, the Z390 Tomahawk couldn’t get our CPU past 5GHz, but it matched the Gigabyte board’s high four-DIMM overclock and exceeded the ASRock model’s high two-DIMM overclock. We’d go so far as to call the Z390 Tomahawk’s two-DIMM overclock stellar, but we’re sure that most overclockers are prioritizing the CPU.
Clock-for-clock CPU performance doesn’t change between boards, so we took a closer look at DRAM performance. The Z390 Extreme4 produced the highest memory performance despite its last-place four-DIMM data rate, and probably because of the thing that caused its last-place data rate: Tighter advanced timings provide more performance but less overclocking headroom.
Overclocking Winner: Tie
Swipe to scroll horizontally
| Gigabyte Z390 Gaming SLI | Z390 Gaming SLI |
| ASRock Z390 Extreme4 | Z390 Extreme4 |
| MSI MAG Z390 Tomahawk | MAG Z390 Tomahawk |
While we’d love to give Gigabyte the award for supporting the Core i9-9900K, it’s only a talking point rather than a consideration in an article that focuses on less-expensive processors.
MSI had the best two-DIMM data rate, but while most buyers in this market will only use a two-DIMM kit, the Z390 Tomahawk was outmatched in CPU overclocking. ASRock’s ability to reach the highest four-DIMM memory bandwidth is similarly unconvincing since so much of the lower-priced system segment is filled with two-DIMM kits.
MORE: Best Motherboards
MORE: How To Choose A Motherboard
MORE: All Motherboard Content
ASRock Z390 Extreme4: Price Comparison
113 Amazon customer reviews
☆☆☆☆☆
$780
View
powered by
Current page:
Overclocking Comparison
Prev Page Features Comparison
Next Page Performance Comparison
Thomas Soderstrom is a Senior Staff Editor at Tom’s Hardware US.
He tests and reviews cases, cooling, memory and motherboards.
Asrock Z390 Extreme4 Compatible Builds
Asrock Motherboard
Compatible Components
(from 863 PCs)
Popular components in PC builds with the Asrock Z390 Extreme4 Motherboard.
| CPU | |
|---|---|
| Core i7-9700KIntel €470Bench 97%, 516,929 samples | 208x |
| Core i9-9900KIntel €406Bench 98%, 348,201 samples | 181x |
| Core i5-9600KIntel €223Bench 95%, 307,434 samples | 163x |
| Core i7-8700KIntel €335Bench 90%, 722,077 samples | 127x |
| Core i7-8700Intel €330Bench 88%, 354,187 samples | 37x |
| GPU | |
|---|---|
| RTX 2070S (Super)Nvidia €529Bench 118%, 569,107 samples | 73x |
| RTX 2070Nvidia €435Bench 106%, 460,951 samples | 64x |
| RTX 2080-TiNvidia €500Bench 172%, 370,356 samples | 51x |
| RTX 2080Nvidia €400Bench 129%, 311,089 samples | 49x |
| RTX 3080Nvidia €925Bench 206%, 353,788 samples | 44x |
| SSD | |
|---|---|
970 Evo NVMe PCIe M. 2 500GBSamsung €83Bench 273%, 381,216 samples |
53x |
| 970 Evo Plus NVMe PCIe M.2 1TBSamsung €116Bench 332%, 443,394 samples | 43x |
| 970 Evo Plus NVMe PCIe M.2 500GBSamsung €83Bench 289%, 406,008 samples | 43x |
| 970 Evo NVMe PCIe M.2 1TBSamsung €170Bench 297%, 331,647 samples | 34x |
| 860 Evo 500GBSamsung €106Bench 105%, 762,998 samples | 27x |
| RAM | |
|---|---|
| F4 DDR4 3200 C16 4x8GBG.SKILLBench 92%, 30,689 samples | 33x |
| Ripjaws V DDR4 3200 C16 2x8GBG.SKILL €68Bench 84%, 287,720 samples | 28x |
| Vengeance LPX DDR4 3200 C16 2x8GBCorsair €60Bench 85%, 653,654 samples | 22x |
| HyperX DDR4 3200 C16 2x8GBKingstonBench 86%, 239,203 samples | 21x |
| Vengeance LPX DDR4 3000 C15 2x8GBCorsair €65Bench 82%, 606,405 samples | 19x |
Specifications
Official site:
www.
asrock.com/…
Prices
Send price feedback
How Fast Is Your PC? (Bench your build)
Size up your PC in less than a minute.
Welcome to our freeware PC speed test tool. UserBenchmark will test your PC and compare the results to other users with the same components. You can quickly size up your PC, identify hardware problems and explore the best upgrades.
UserBenchmark of the month
How it works
- — Download and run UserBenchmark.
- — CPU tests include: integer, floating and string.
- — GPU tests include: six 3D game simulations.
- — Drive tests include: read, write, sustained write and mixed IO.
- — RAM tests include: single/multi core bandwidth and latency.
- — SkillBench (space shooter) tests user input accuracy.
- — Reports are generated and presented on userbenchmark.com.
- — Identify the strongest components in your PC.
- — See speed test results from other users.
- — Compare your components to the current market leaders.
- — Explore your best upgrade options with a virtual PC build.
- — Compare your in-game FPS to other users with your hardware.
Processor Rankings (Price vs Performance)
November 2022 CPU Rankings.
We calculate effective speed which measures real world performance for typical users. Effective speed is adjusted by current prices to yield a value for money rating. Our calculated values are checked against thousands of individual user ratings. The customizable table below combines these factors to bring you the definitive list of top CPUs. [CPUPro]
ADVERTISEMENT
