Main WiFi/Bluetooth antenna Playstation 4 Slim repair — Free guide
USD
Level :
Easy
Time : 20 min
Author : Alexandre
2525 people have done this repair successfully ! Why not you?
Your PlayStation 4 Slim no longer receives WiFi? It is hard to download updates and your internet connection is not to blame? Controllers tend to randomly and repeatedly disconnect? Don’t worry because SOSav is here to help you solve all your problems. Thanks to our repair guide which comes with pictures and comment we will show you how to show you how to replace the WiFi/Bluetooth antenna of your PS4 Slim yourself for a price two to three times cheaper than going to a professional. You won’t have any connection issues with your controllers, you will be able to play online again without fearing to be disconnected at any moment! Repair your PS4 Slim to save the price of a repair at the manufacturer’s customer service!
Symptoms:
- Poor Wifi reception
- Loss of connection with controllers
- Controller issues (buttons)
- No sound in the bluetooth headphones
- Low internet speed
Some advice before you start
Recommended repair kit
Required spare parts
Required tools
Guide format :
Pdf
Integrate
See in HD
Step 1
Before replacing the main WiFi/Bluetooth antenna of your Playstation 4 Slim, you have to turn it off and disconnect all its cables for safety reasons (especially the power supply cable and the HDMI).
Use the nylon spudger to unclip the hard disk plastic bracket.
See in HD
Step 2
Then, use the cruciform screwdriver to remove the screw circled in red securing the hard disk tray.
See in HD
Step 3
Grasp the plastic element and gently pull it to remove the hard disk tray.
Remove the whole tray.
The hard drive of your Playstation 4 Slim is now removed.
See in HD
Step 4
Use the iSesamo to gently peel off the guarantee label stuck near the input/output connector of the console, on the back.
See in HD
Step 5
After that, remove the screw circled in red with a Torx T8 screwdriver.
See in HD
Step 6
Slide the iSesamo in the space on the left side and then on the right side. Pry up to unclip the lower case.
See in HD
Step 7
Grasp the lower case and remove it.
See in HD
Step 8
The lower case of your Playstation 4 Slim is now removed.
See in HD
Step 9
Gently disconnect the WiFi/Bluetooth antenna with the nylon spudger.
See in HD
Step 10
Then, remove the screw circled in red securing the antenna.
See in HD
Step 11
After that, grasp the antenna by its cable and gently remove it.
See in HD
Step 12
Grasp the antenna and remove it.
See in HD
Step 13
The main WiFi/Bluetooth antenna of your Playstation 4 Slim is now disassembled.
You can replace it with a new one if needed.
To reassemble your Playstation 4 Slim follow this guide in reverse order.
Recommended repair kit
Required spare parts
Required tools
They’re talking about us
SOSav in the press
Does PS4 Have WiFi? (Explained)
Disclaimer: This post may contain affiliate links, meaning we get a small commission if you make a purchase through our links, at no cost to you. For more information, please visit our Disclaimer Page.
In today’s world, more and more of what we do every day requires some form of internet connection.
At first, our computers were connected to the internet via a cable, now our phones, laptops, and PCs all have wireless connection capabilities. And since lots of people love to game, the question arises: Does the PS4 also have any WiFi?
All variants of the PlayStation 4 have built-in WiFi, but, depending on the specific model, the internet speeds will differ due to the difference in WiFi standards.
The PS4, being an 8th generation console, allows its users to connect to the internet in order to download content such as games and movies, as well as enabling them to unite in a game to play as a team in multiplayer modes.
But just how good is the connection provided by the PS4’s wireless chip? Which PS4 variant is the best? Read on to find out!
Table of Contents
Can You Use Your Phone if Disconnec…
Please enable JavaScript
Types of WiFi Standards
Before I go and detail the WiFi of the PS4 variants, I will talk about the WiFi standard that was in use when the original PS4 was released (802.
11n or WiFi 4), and the standard that came after it (802.11ac or WiFi 5), the one that we use today.
802.11n (WiFi 4)
This WiFi standard was approved in 2009, it was the first standard to be dual-band (utilizing both 2.4GHz and 5GHz frequencies), and to specify MIMO (“Multiple Input, Multiple Output”): using more antennas to boost speeds and reduce error.
It is backward compatible with previous WiFi standards. WiFi 4 can have speeds ranging from 40Mbps to about 400Mbps.
802.11ac (WiFi 5)
The successor to the WiFi 4 standard, the 802.11ac, was released in December 2013. It is essentially the upgraded variant of the 802.11n standard, with higher bandwidth rates capable of reaching a couple of thousand Mbps.
WiFi 5 is also backward compatible with previous standards (including WiFi 4).
PlayStation 4
The PS4 is an 8th generation console released by Sony in November 2013. It is the 4th best-selling console ever with over 110 million sold (different variants included).
It was replaced by the PlayStation 5 in November 2020.
The base model was equipped with a 500 GB hard drive, 8 GB of GDDR5 RAM, and an AMD Jaguar CPU, paired with an AMD GPU with a peak performance of 1.84 TFLOPS.
As it was released just one month before the newer, faster WiFi standard, it had to make do with the slower, WiFi 4 standard.
PlayStation 4 Slim
The PS4 Slim is the revised model of the original PS4 model, giving it a smaller body. It has the same internal specifications as the base model, but having the benefit of being released later (September 2016), it has the upgraded WiFi 5 capable wireless card.
Think of it as a sleeker and cooler-looking version of the standard PS4, with an upgraded WiFi card. Actually, nothing would be different apart from the design, had it not come out after the release of WiFi 5.
PlayStation 4 Pro
The PS4 Pro was released in November 2016, two months after the PS4 Slim. This variant is the most powerful model of the three: the GPU has been upgraded to a model capable of 4.
2 TFLOPS and has a 1TB hard drive equipped as standard. It is also the PS! Variant with 4K HDR capabilities.
Just as with the PS4 Slim, it is equipped with a WiFi 5 card, giving it a much more reliable and faster connection speed compared to the original PS4.
The newer WiFi standard gives the PS4 Pro (and Slim) much higher connection speeds thanks to the ability to utilize 5GHz frequencies.
Which Model Do I Recommend?
I don’t have a straight answer to this, because there really isn’t one. I believe that each model has its own benefits and respective drawbacks.
All models are available in 1TB storage options, with the Slim and base models coming with 500GB hard drives as standard.
The base PS4 model is a great choice for someone who doesn’t need all the flair of the other two: a casual gamer, for whom the 500GB storage is plenty, and doesn’t need the 4K capabilities of the Pro model.
More importantly, I recommend this model for individuals who like to have their games in physical form and mostly play single-player games.
This is important because the base model has a last-gen WiFi card, having lower speeds and lower connection reliability.
Next on the list is the PS4 Slim, which is almost identical to the base model. The changes concern the dimensions (it is smaller in all ways),
Tt has the newer, upgraded WiFi card, which allows for faster download speeds (so your games download faster, for example), and more reliable connections (you will experience less lag and packet loss in multiplayer games).
Other than the previously mentioned differences, the internal build of the two models is identical, having the same processor, graphics card, and storage.
In my opinion, the 1TB option of the Slim model is the best pick of the three variants. It is the perfect balance of upgrades and compromises.
What the PS4 Pro brings in excess to the other two alternatives are 4K capability and a beefier graphics card. It has 1TB storage as standard, so having lots of games won’t be an issue.
Having the newer WiFi card also gives it the same benefits as those of the Slim model.
I imagine the PS4 Pro would be a great companion to someone who is passionate about gaming.
The improved GPU and 4K HDR option put out a truly stunning result (if you have a 4K HDR display, of course), and the WiFi card guarantees great download speeds and lag-free gaming. But all this makes it the most expensive of the three.
To conclude, I will have to recommend the PS4 Slim and the PS4 pro more than the standard version, especially when it comes to internet connection and the functions you can carry out with its help.
With the world of technology improving rapidly, the standard PS4 is just starting to be left behind and could cause noticeable issues with connection.
Lower connection reliability is just enough to make multiplayer gaming somewhat laggier than it should be, and it makes for frustrating download speeds when compared to today’s devices.
Of course, the PS5 and the upcoming models will deliver way better speeds and reliability than any PS4 model could, but if you are looking for the best PS4 to buy, stick with the Slim or Pro versions if you plan on downloading games or perhaps playing some multiplayer.
How to Use the Internet on a PS4?
I am a modern person, and I love electronic devices. I have had contact with lots of different laptops, phones, TVs, and, yes, consoles.
Each one had a different way of connecting to the internet, and it is truly frustrating having to find that specific way each and every time. So I will do my best to help you connect your PS4 to the internet.
The first step is to turn on the console. If this is your first time turning on your console, connecting to the internet is easy.
You will be prompted with a typical Set-Up menu, where you will have to log in to your accounts, adjust some basic settings, and, most importantly, connect to a network. Type in the required data and you are good to go.
The harder route is when you have a change the network on your working console. The first step is again to turn on the console.
Next, find the settings menu on the home screen. In the settings menu, find the submenu called “networks”.
In the networks menu, find the button called “set up Internet connections”, which has “WiFi” in it. Next, you will have a choice between connection types: “easy” will automatically search for nearby networks, and you can click on the one you would like to connect to, while “custom” allows you to tweak further settings (like Proxy).
From my experience, your PS4 should connect without problems. But there are some things that you should consider.
If there are too many devices using your network your PS4 might not connect. Also, signal strength has to be strong enough to have a stable connection (it is best to have your console as close to your router as possible).
Another way to connect your PS4 to the internet is to connect it via an internet cable.
This type of connection will be faster and more stable than the wireless option. Just as last time, find the “set up Internet connections” menu, and select “use a LAN cable”. You will have the same choices as last time (easy or custom), and you are done.
Once you are connected to the internet with your PS4, you can surf the web with the help of the built-in browser, which can be found in the content area.
You can use your controller to navigate the web. This is the place you can download games and movies from, too.
Another benefit of connecting to the internet with your PS4 is that you can access a plethora of useful and popular apps. For example, you could stream your gameplay directly with the help of Twitch, or watch a movie on Netflix or videos on YouTube, or just listen to some music on Spotify.
Conclusion
The PS4 is still a great console. Yes, there is a newer option in the PS5, but for the money, it is unbeatable. It has a great selection of games and apps available for it, and it also doubles as a Blu-ray player, which might come in handy for high-quality home-cinema experiences.
The base PS4 has had its problems, namely with its connectivity (WiFi 4 and Bluetooth 2.1), but these issues have been addressed by the release of two later models, the PS4 Slim and the PS4 Pro.
The PlayStation 4 is one of the best-selling consoles of all time for a reason, but as mentioned before, if you are looking to enjoy the console for some time, you should definitely be aiming for the upper end of the PS4 spectrum.
There is a concept in tech called “future-proof” or “future-proofing”, which is basically used to refer to how the duration that the given device will hold up the modern atmosphere of constant technological improvement.
So in short, the PS4 is a great console, but the Slim and Pro versions are just that much more future-proof, and thus the better options as of now. Better overall performance and higher-quality WiFi cards both contribute to a better overall experience as well.
Related posts:
report this ad
Having trouble connecting to Wi-Fi on PlayStation 4? Here’s what to try
Wi-Fi issues on PlayStation 4 Very frustrating, especially when playing in multiplayer mode.
If your PS4 keeps disconnecting from Wi-Fi, you will have difficulty playing online games or downloading updates. And if you can’t connect your system to the internet at all, you won’t even be able to join your friends in a game party or browse the PlayStation Store.
We’re here to help you resolve any issues you may have with your PS4 internet connection. Let’s see what to do if your PS4 Wi-Fi connection is slow, weak, or not at all. nine0003
1. Reboot the gaming device and router.
Any network troubleshooting should begin by restarting all affected hardware. You can resolve a lot of temporary bugs by doing this, and this is the quick step to take first.
Reboot the network by restarting the router (and modem if you have separate devices). To do this, simply unplug the power cord, wait a few seconds, and then plug it back in. Your network devices may have physical power buttons on the back that you can use instead of pulling the power plug. nine0003
After the network device starts connecting devices again, restart the PS4.
To do this, press and hold the PS button on your controller to open the quick menu. In this menu, open the Power section and select the option Restart PS4 . Make sure you don’t choose to go into rest mode — this is a low power state where the system doesn’t shut down completely.
Once everything has rebooted, try connecting your PS4 to Wi-Fi again. If that doesn’t work, make sure you can connect to the Internet on another computer or device. Keep reading if your PS4 won’t connect to Wi-Fi but everything else does. If nothing connects to the Internet, you should Troubleshoot your home network. nine0003
2. Run the PS4 network test.
If a simple restart doesn’t fix the Wi-Fi issues on your PS4, you can run the built-in network test to get more information on where the problem is. On PlayStation 4 go to Settings -> Network -> Check Internet connection .
This will run a short test and display details of success or failure for each of the following, respectively:
- Get IP address : Whether your system successfully obtained an IP address from your router.
If this fails, it means that your PS4 is not connecting to the router properly. - internet connection : This test will work as long as your PS4 has internet access. If this fails, then the problem is between the router and the Internet.
- Sign in to PlayStation Network : Checks if your system has access to PlayStation Network. If this fails, you may be using a network that is blocking the PlayStation Network. Although the problem is less likely, the problem could also be on Sony’s side. nine0034
If your computer passes these three checks, then your PS4 is properly connected to the Internet. In addition, you can test a particular game to make sure all its online features work.
There is also some additional data from this test that may help you troubleshoot:
- NAT Type : The PlayStation uses a confusing system where your NAT can be type 1, type 2, or type 3.
nine0030 - Enter 1 This means that your system is directly connected to the Internet, which is rare.
Enter 2 This means you are connected to the Internet through a router, which most users will see. And also Enter 3 This means that your system cannot use all the necessary ports, which often leads to instability.
Now that you have a better idea of what your problem is, let’s look at the various steps to fix bad Wi-Fi on PS4.
3. Confirm the Wi-Fi network details.
If your PS4 does not connect to the router at all, the IP address check will fail. In these cases, you must ensure that you have the correct set of Wi-Fi network information.
Go to Settings -> Network -> Set up Internet connection -> Wi-Fi usage -> Easy And follow these steps again to reconnect to your network. When doing this, make sure that you enter the correct Wi-Fi password, as the wrong password is a common mistake.
As a possible solution, you can also try changing your DNS settings to use a third party provider instead of your ISP’s servers. To do this, select Custom instead of Easy. You don’t need to change any other settings, so select «Automatic» for the IP address settings, and then don’t specify a DHCP hostname. nine0003
On the DNS settings screen, select » user manual » and enter the information for the alternative DNS server. If you’re not sure what you want, you can use Primary DNS 8.8.8.8 and Secondary DNS 8.8.4.4 for Google’s public DNS servers.
Confirm this, then select Automatic for the MTU settings and. Do not use for proxy server . From there, you can test the connection again.
4. Improve the reliability of weak Wi-Fi on PS4. nine0009
Although Wi-Fi is convenient, it is subject to a lot of interference. If your PS4 cannot stay connected to the network or is running at low speed, you can improve your bad connection by doing the following:
- Move PS4 closer to your router : The farther your system is from the router, the weaker the Wi- fi.
If possible, bring them closer together. You can check the Wi-Fi signal strength on PS4. Settings -> Network -> View connection status ; Look for the signal strength entry. - Reduce interference : Wi-Fi does not transmit well over hard metal, concrete, or other thick surfaces. You may also experience poor Wi-Fi performance if there are microwave ovens, baby monitors, or other similar devices nearby that use the same frequencies. Try to maintain a straight line between the PS4 and the router as much as possible and get other devices out of the way.
- Limit the use of other devices : Your PS4 network performance will degrade when other devices in your home are using the bandwidth. Try turning off computers, phones, and other gaming systems, especially if they are downloading large files, streaming 4K media, etc.
Follow More Tips for Speeding Up Your Wi-Fi Connection If you suspect this is the problem.
And if you’re using a VPN with your PS4, it’s a good idea to turn it off as it increases your load. nine0003
On a similar note, you might be wondering if your PS4 can connect to the 5GHz band on your router. As it turns out, the PS4 Slim PS4 Pro can use the 5GHz band, but the original PS4 model can’t. Compared to 2.4 GHz, 5 GHz connections are often faster and not subject to much interference, but they don’t travel very far.
If your PS4 is near your router and you have a compatible model, it’s worth trying the 5GHz band on your router. Keep in mind that the 5GHz band on your home Wi-Fi and 5G internet service are not the same thing. 5G This is the standard for mobile internet; You should be able to connect any PS4 to a 5G connection if you have one. Check out How to boost and improve your Wi-Fi signal and extend your network range. nine0003
5. Make sure the PlayStation Network is available.
There is a possibility that the PlayStation Network is down, preventing you from connecting to its online services.
While rare, it’s worth checking out (especially if you’ve been unable to sign in to PlayStation Network before).
Check PSN Status Page Sony needs to make sure everything is near the green light. You can also do this on your PS4 at Settings -> Network -> View status of PlayStation Network 9 services0016 .
If your PSN is down, you have no choice but to wait for Sony to fix the problem.
6. Check the router settings.
If you’re still having problems, chances are your router setting is preventing your PS4 from connecting to the internet. Likewise, if you got type 3 for NAT type in the connection test, you may need to forward ports in your router so that your PS4 can connect properly. nine0003
Make sure you are not restricting router traffic for your PS4. For example, parental controls or MAC address filtering can be set. When using NAT type 3, or if you only have problems with certain games, you may need to forward the correct ports on your router.
See Sony Support Page In the PS4 network test, to find out which ports require forwarding for PSN services, check the documentation for your particular game to find the appropriate ports. Please note that if you experience this issue on a school or work network, PSN may be blocked by your organization. There is little you can do if you do not manage the network. nine0003
7. Try to connect to the guest network on the router.
Although it may seem strange, some GameFAQs أعضاء contributors They found that this solution suits them, especially on the original PS4 model. If your PS4 is not connecting to Wi-Fi reliably, try enabling Guest Network on your router and connect to it on PS4.
After configuration, the connection will not work initially. To fix this, you need to open the Internet Browser app on your PS4 and sign in with your guest network password. After that, you should be connected to the Internet as usual. nine0003
Depending on your router, you may be disconnected from the guest network after a certain period of time.
Keep this in mind so you don’t get fired from the multiplayer mission.
8. Connect with an Ethernet cable.
While we hope one of the above fixes will help you, when your Wi-Fi signal is very weak or not working at all on PS4, a wired connection is always best. Connecting your PS4 to your router with an Ethernet cable will result in a more stable connection with faster data transfer rates. nine0003
If possible, we recommend using a network cable to connect your PS4 to the Internet. Even if you can’t do it in the long run, try connecting with an ethernet cable and check for PS4 system updates that might fix your Wi-Fi issue.
If that doesn’t work for you, try using Powerline adapters that run an Ethernet connection over the power lines in your home. Just plug one device into the wall through the router and the other into the console. Check Tips for Troubleshooting a Slow Ethernet Connection. nine0003
Bad Wi-Fi connection on PS4 fixed
Now you know what to do if your PS4 stops connecting to Wi-Fi or the connection becomes unreliable.
We hope you can make small changes to fix and improve your Wi-Fi so you can play online again. If nothing else works, you may need to reset your PS4 to factory settings. But this is the last terrible step.
Once your PS4 is online again, you will be able to enjoy many PlayStation Network services again. nine0003
Source
How do I connect my PS4 to the internet via Wi-Fi or LAN cable?
The PlayStation 4 must be connected to the internet in order to use all the features and functionality. The game console will work without an internet connection, but you will not be able to buy or download games from the PlayStation Store (you need to buy games on discs), play online, download game and software updates, chat with your friends, use the browser and other applications ( the same YouTube) who need access to the Internet (and these are almost all applications). There are some games that won’t run without a network connection. Well, as far as I understand, for the initial setup of the console, it still needs to be connected to the Internet.
PS4 without an internet connection will get you bored very quickly, as its functionality will be severely limited. nine0003
PlayStation 4 can be connected to the Internet using Wi-Fi, or a network cable (LAN). In the case of Wi-Fi, PS4 connects without problems to any Wi-Fi router, phone in access point mode, when distributing Wi-Fi from a computer, etc. Internet via a network cable can be connected to the PlayStation in the same way as from a router, and directly from the Internet provider (you can even set up a PPPoE connection). Playstation is absolutely universal in this regard.
For comfortable work, it needs to provide a fast and stable Internet connection. If you plan to download games over the Internet, then you need to understand that a normal game weighs approximately 50 GB. For example, I have a rate of 100 Mbps from a provider. The router is powerful, and in the 5 GHz band it gives out the same 100 Mbps (the set-top box receives 80/90 Mbps), and I can’t say that a 50 GB game loads fast for me.
And if the speed was, say, 20 Mbps, and not 100? Online games require low ping. I’m not talking about streams, etc. You also need to understand that the PlayStation 4 creates a big load on the network and the router itself. And if the router is budgetary, other devices are connected to it, then it will either freeze altogether or cut the speed. Also, the load will be high ping.
The PlayStation 4 (Slim, Pro) supports Wi-Fi 5 GHz (802.11ac). And if you plan to connect the console to the Internet via Wi-Fi, then I recommend connecting it in the 5 GHz band. To do this, you must have a dual-band router that supports this frequency and the 802.11ac standard. As for the speed (tariff), then with 100 Mbps you can live quite comfortably. The main thing is that the router does not cut the speed much. If possible, it is of course better to connect the PS4 to the Internet using a cable. Wi-Fi 5 GHz (802.11ac) is certainly better (faster) than Wi-Fi 2.4 GHz (802.11n), but cable is even better.
As for the router, I would advise buying models from the middle price range (from $100). But this does not mean that if you bought a Playstation, then you immediately need to throw away your router. Connect (preferably by cable), check how everything will work. If the download speed is normal, nothing freezes, there are no problems in online games, then everything is OK. nine0003
Next, I will show you in detail how to connect your PS4 to the Internet using a wireless Wi-Fi network and a network cable. There is nothing complicated, but there are a few nuances. Also, this instruction may come in handy when reconnecting the game console to the Internet. For example, after changing the provider, router, Wi-Fi network name or password, etc. The guide is suitable for PS4, Slim, Pro.
How do I connect my PlayStation 4 to a Wi-Fi network?
Turn on the game console and go to the settings. nine0003
Go to the «Network» section.
To connect or disconnect the PlayStation 4 from the Internet (via Wi-Fi and cable), you can check / uncheck the box next to «Connect to the Internet».
To connect to a Wi-Fi network, select «Connect to the Internet».
Next, select «Use Wi-Fi» .
We will use the «Easy» way to connect to the Internet. nine0003
Personally, I did not immediately understand what «Simple» and «Special» connection method means and how they differ. Later I found out that by selecting «Special», PS4 offers to manually set some network parameters. Manually specify the IP address, default gateway, DNS addresses, etc. By selecting «Simple», the system will automatically configure the connection (automatically obtain addresses).
Select your network from the list of available Wi-Fi networks.
nine0216 By default, the PlayStation 4 searches for Wi-Fi networks on both the 5 GHz and 2.4 GHz bands (Automatic). If necessary, you can select one range. To do this, in the window with the list of networks, you need to click on the button Options (on the gamepad) and select the desired range.
To connect the Playstation 4 to a Wi-Fi network using WPS, in the window with the list of available networks, select item «Configure using the WPS button» . After that, you will need to activate WPS on the router.
There is also an item «Install manually». After selecting it, we will see two more items «Enter manually» and «Use the WPS setting by entering a PIN code.»
The first point allows you to connect the PS4 to a hidden Wi-Fi network (with a hidden SSID), where you must first enter the network name and then the password. And the second one allows you to establish a connection using the WPS PIN code, which can be found on the router itself, or created in the router settings (not a very relevant and common connection method). nine0003
We need to enter the password for our Wi-Fi network. Just look carefully, you need to enter the password correctly. If you do not know the password for your network, then see the article How to find out your Wi-Fi password, or what to do if you forgot your password.
We check if we entered the password correctly and click on the «OK» button.
We are waiting for our PlayStation 4 to connect to the Internet via Wi-Fi. A message should appear that the Internet settings have been updated and a «Test Internet connection» button. You can click on it. You should see something like this:
«Obtain an IP address» and «Connect to the Internet» — «Successful» indicates that the game console is connected to the router and there is access to the Internet. You may not be signed in to PlayStation Network. Internet connection speed is approximate. I ran it through Speedtest, in a web browser on PS4, so the results are much higher there. Depends on the server. Although for some reason my ping is much higher than on the iPhone. On PS it shows about 20 (when checked through Speedtest), and on iPhone ping is 2. Both devices are connected to a network in the 5 GHz band. nine0003
To view connection details (what network the game console is connected to, in what frequency range, what IP address the router assigned it, signal strength, etc.
), in the «Network» section, select item «Check connection status» .
You can also run an Internet connection test at any time. To do this, in the «Network» section, select «Test Internet Connection».
PS4 Internet connection via cable (LAN)
First, connect a network cable to the LAN port on the PlayStation 4 from a router, or directly from an Internet provider.
Next, go to the settings, to the «Network» section. There we select «Establish an Internet connection».
We will «Use a LAN cable».
Next, you need to select the connection method. Look carefully here:
- Simple — automatic connection setup. The PlayStation 4 itself will establish a connection with the router, or provider. By choosing this method, we will not be able to set any settings manually. Suitable when connecting to routers (if a DHCP server is running on the router) and Internet providers that use the «Dynamic IP» (DHCP) connection type.
Most likely you need to choose this type of connection. If you don’t know, select it first. Your game console may connect to the Internet automatically. nine0034
- Special — when choosing this setting, we will be able to configure PPPoE (specify the username and password that the provider issues), register static IP addresses, manually specify DNS servers, set proxy settings, MTU.
After selecting «Simple», you need to wait a bit.
If all is well, a message will appear: «Internet settings updated». Click on the «Check Internet Connection» button below.
Obtaining an IP address and connecting to the Internet must be successful.
This means that our PS4 is connected to the internet with a cable. You can close the settings and start playing!
Connecting a PS4 cable directly from the provider and setting up PPPoE
Many connect the Internet not from the router, but directly from the provider.
That’s also possible. Most ISPs use the «Dynamic IP» connection type, which means that the connection setup process will be no different from what I showed above. But some providers use the PPPoE connection type (via login and password). On PlayStation 4, you can easily set it up. But L2TP or PPTP, as I understand it, cannot be configured on PS4. Only through a router. nine0003
PPPoE is very easy to set up. But first, in the LAN port on the set-top box, connect the network cable that the Internet provider has laid in your home. Then in the settings, starting the Internet connection, select «Use LAN cable» and method «Special» (I wrote about them above). Well, then choose «PPPoE» .
Enter the username and password (they are issued by the Internet provider) and click «Next».
If everything is connected and you have specified the correct PPPoE settings, then an Internet connection should be established.
nine0003
Setting up static IPs, DNS, proxy, MTU on PlayStation 4
There are situations when you need to manually enter an IP address or DNS server address in the properties of a network connection. For example, when the DHCP server is disabled on the router, you have reserved a static IP address for the game console, or the provider uses the «Static IP» connection type. On PlayStation 4, you can do it all. You can also manually set the MTU value or set the proxy server settings.
nine0002 To do this, when connecting to a wired LAN or Wi-Fi network, you need to select «Special» connection method.
Next you need to select «IP address settings». You can select «Automatic».
In this case, the Playstation will offer to set the following parameters:
- DHCP host name.
- DNS settings. You can, for example, register on the PlayStation 4 DNS from Google (8.8.8.8 / 8.8.4.4).
- MTU settings.
